Recently Announced

• Mill-Max Announces New 4mm Pitch Spring Connector - Mill-Max announces a new ruggedized long stroke 4 mm pitch spring-loaded connector (SLC) that is aimed at tough applications in rough environments.
• Mill-Max Introduces Discrete Insulated Pins and Receptacles - Mill-Max announced a new selection of insulated terminals that includes three header pins, two receptacles and one solder cup pin to suit a variety of uses.
• Mill-Max Introduces the Swage Mount PCB Pins For Interconnect Applications - These swage mount terminals are designed to be mechanically fastened to a board or panel and plugged into sockets or soldered into mating boards in board stacking and other interconnect configurations.
• Mill-Max Announced the Release of the Lowest Profile Target Connectors - Mill-Max is excited to announce the release of the lowest profile target connectors with an above board height of only .087" (2,21mm).
• Mill-Max Expands Its Triple Row Connector Series - Mill-Max has expanded its triple row connector series' to include long stroke, through-hole mount spring-loaded pins and mating target connectors.
• Mill-Max Press-fit PCB Pins for Plated Through-Holes - Mill-Max is adding to its diverse mix of press-fit pins with six new offerings designed for applications where mechanical strength and/or power delivery are essential.
• Mill-Max Offers USB 3.1 Type C Vertical SMT Receptacle - Mill-Max has added the Vertical SMT Super Speed Universal Serial Bus 3.1, Type C to its line of USB IO Sockets.
• Mill-Max Introduces 3 mm (.118") Maximum Stroke Spring-Loaded Pin - Mill-Max announces a new addition to its spring-loaded pin selection with the introduction of the 0919-0-15-20-89-14-11-0.
• Mill-Max Introduces Five New Wire Termination Contacts - Mill-Max has expanded its selection of wire termination products with the addition of new wire crimp and solder cup receptacles.
• Mill-Max Offers Miniature Receptacles for Diverse Applications - For applications requiring miniature receptacles, Mill-Max offers four diverse, off -the-shelf products which will fulfil all needs.
• Mill-Max Expands its Line of Solder Cup Spring-Loaded Pins - Mill-Max announces a new addition to its spring-loaded pin selection with the introduction of the 0973-0-15-20-77-14-11-0 which is designed to accept up to 20 AWG wire, has a maxi-mum stroke of .080" (2,03 mm) and can be used at a minimum spacing of .100" (2,54 mm).
• Mill-Max Expands the Series of Straight and Right Angle Pins - Mill-Max has developed additional straight and right angle male PCB pins to complement the existing 35XX and 37XX series.
• Mill-Max Introduces Unique Low Profile SMT Target Discs - Mill-Max is excited to announce a new addition to its family of spring pin mating products.
• Mill-Max Expands Spring-Loaded Target Connector Lineup With Concave Face Right Angle, HSMT, and More - Mill-Max is expanding its selection of target connectors in both 100" (2,54mm) and .050" (1,27mm) grid families.
• Mill-Max Fine Pitch Right Angle & Horizontal SMT Spring-Loaded Connectors - Mill-Max is pleased to introduce new .050� (1.27 mm) pitch spring-loaded right angle and horizontal SMT connectors to its standard product lineup.
• Mill-Max Offers Top-Mount USB 3.1 Type C Receptacle - Mill-Max has added the Top-Mount SuperSpeed Universal Serial Bus 3.1, Type C to its line of USB IO Sockets.
• Mill-Max SMT Spring-Loaded Connectors Now Offered on T&R - Three additional Mill-Max SMT spring-loaded connectors are now available packaged on tape and reel.
• Mill-Max has expanded line of discrete insulated spring-loaded pogo pins - Mill-Max has expanded its line of discrete insulated spring-loaded pogo pins.
• Mill-Max Offers USB 3.1 Type C Receptacle - Mill-Max has added the SuperSpeed Universal Serial Bus 3.1, Type C to its line of USB IO Sockets.
• Mill-Max Expands its Selection of .090" Stroke Spring-Loaded Pins and Connectors - Mill-Max has added three new heights to the popular 0914 series of spring-loaded pins and corresponding single and double row connectors.
• Mill-Max Multi-Purpose Terminal - Mill-Max new terminal pin is suitable for use in a variety of board-to-board and wire-to-board applications.
• Mill-Max Combination Connectors for Signal and Power - Mill-Max new connector products are designed for combined signal and power transmission.
• New Tape & Reel Packaged SMT Pin from Mill-Max - pin for use as a test point or for low profile board-to-board connections. These pins are available packaged on tape & reel for pick-and-place assembly or in bulk for low volume requirements and prototyping.
• Micro-Miniature Organic Fibre Plug® Receptacle - Mill-Max has added a micro-miniature option to our organic fibre plug® receptacle lineup.
• Shrouded Male Pin Connectors - Mill-Max's shrouded male pin connectors are for applications where a robust, secure connection is demanded, such as frequently mated interconnects and blind mate conditions. These double row connectors come in 4 to 64 pin configurations and are available in through- hole and surface mount termination styles.
• Organic Fibre Plug Solder Barrier - Mill-Max's organic fibre plug (OFP) solder barrier receptacles are discrete sockets for through-hole soldering into printed circuit boards.
• Double Row Solder Cup Spring Pin Header Strips - a convenient and reliable method to make connections between wires and mating components such as P.C. boards, batteries or other cable assemblies with our new single and double row solder cup spring pin header strips.
• Mill-Max Introduces Triple Row Header Strips and Triple Row Solder Tail Socket Strips- The new Mill-Max 804 and 805 series interconnects are ideal for high pin count I/O and board-to- board applications.
• Mill-Max offers Rugged, Higher-Current Spring Pins - Mill-Max now offers a series of rugged spring pins capable of carrying 9 amps continuous current at a low 10� C temperature rise. The Mill-Max 0850, 0851, 0852 and 0853 spring pins are the perfect solution for rugged applications and for use in circuits operating at currents above signal level.
• MILL-MAX Adds 2 New Receptacles With Organic Fibre Plug® Solder Barrier � 10 Sizes Now Available; 8 On Tape - Mill-Max�s knock-out-bottom receptacles are discrete sockets for soldering into printed circuit boards. Ten sizes are now available; eight have carrier tape as standard packaging. Tape packaging is becoming increasingly popular since it permits thru-hole components to be placed simultaneously with surface mount parts on pick-�n-place assembly lines.
• MILL-MAX Expands its Spring-loaded Connectors Line To Include 3 Families of Single and Double Row Strip Assemblies and 31 Discrete Contacts - When the power is on, you don�t want shock or vibration to create spurious signals. Mill-Max Spring-loaded Connectors provide a reliable electrical connection in the most rigorous environments.