|
|
|
- Universal Cable Grip - The slotted cable holder with pressure grips mounts to a panel using #6 or M3.5 screws. It can accommodate up to seven cable bundles and cable holders can be removed to accommodate larger cable bundles.
- Side Mount Circuit Board Support - The Side Mount Circuit Board Support slides easily into a pre-formed slot leaving no protrusion under the chassis. It is reusable and easily removable.
- Stud Mount Clamp - The stud mount clamp is installed by pushing the clamp onto an exposed screw or stud with thread sizes #8, #10, M4 or M5. The clamp has a release latch that locks cables in place while allowing for later changes.
- SCBSST Series - The SCBSST Series is a self-threading circuit board support.
- Heilind Electronics Receives Platinum Distributor Award - Heilind Electronics, the largest distributor of interconnect products and electronic hardware in North America, has been given the Platinum Distributor Award from Richco, a global manufacturer of plastic components.
- FTH-41 - Flat Tie Holder, Pressure Hold - Provides a pressure hold onto the cable tie allowing for pre-assembly. It is easily installed into a pre-drilled hole and is removable from the top side of the panel by pinching the "wings."
- CBSP PCB Spring Spacer - The CBSP, when assembled, provides continuous force to the PCB. It keeps light sensors on the PCB in constant contact with the touch control cover. The CBSP is a cost-effective alternative to solutions with a metal spring, and its one-piece design reduces the need for hardware.
- Richco Releases DLCBSHD Heavy Duty Circuit Board Support - a one-piece solution that obsoletes the need for screw-nut assemblies, which reduces inventory and assembly time. Its larger design provides a strong, sturdy mounting method for heavily-loaded PCBs, and is offered in five different spacer lengths. The DLCBSHD is RoHS compliant and is available in both UL94 V2 and UL94 V0 material.
- Cable Management Products - View our comprehensive catalog featuring a range of wire management, cable management and hose management products in both plastic and metal materials. Richco offers plastic clips, plastic clamps, wire saddles and curly lock designs in addition to innovative products such as Cableater (SHR). Richco also offers a variety of cable clamps, wire clamps, and hose clamps. These parts have a wide variety of mounting methods including self-adhesive tape, screws, rivets, blind hole, and push through arrowhead designs.
- Circuit Board Hardware - View our catalog featuring a range of products for printed circuit boards (PCBs), which aid the support, spacing, locking and guiding of the board within electronic applications. Richco�s circuit board hardware products are available in a wide array of materials and provides the largest selection of PCB hardware products in the electronics industry.
- Richco Releases DLCBSHD Heavy Duty Circuit Board Support - a one-piece solution that obsoletes the need for screw-nut assemblies, which reduces inventory and assembly time. Its larger design provides a strong, sturdy mounting method for heavily-loaded PCBs, and is offered in five different spacer lengths. The DLCBSHD is RoHS compliant and is available in both UL94 V2 and UL94 V0 material.
- Richco Introduces the SC1, Flexible Screw Cap - Richco introduces the SC1, flexible screw cap that covers screws and protects it from dust and dirt
- Richco Introduces the TR - Tough Rivet - Richco introduces the TR, tough rivet, made from a super tough impact modified UL94 HB nylon 6/6 in black color
- Richco Introduces the FCSE Cable Clamp - Slide Entry - Richco introduces the FCSE cable clamp - slide entry that is removable from top side of mounting surface
- Richco Introduces the WIT-30RCA Releasable Cupped Cable Ties - Richco introduces the WIT-30RCA releasable cupped cable ties, a one piece design that saves time and costs associated with inventory and assembly
- Richco Introduces the (TFR) Toggle Screw Grommet - Richco introduces the (TFR) toggle screw grommet that expands and securely locks the screw and assembled parts in place
- Richco Introduces the (FTH-31) Edge Clip Tie Holder - simply push the clip onto the edge of a panel to accept a cable tie and to mount a cable bundle
- Richco Introduces the (PGSB-A) Open Bushings - Richco introduces the (PGSB-A) open bushings that convert raw or sharp edged holes into smooth, insulated holes
- Richco Introduces the (LLF) Leg Leveling Foot - Richco introduces the (LLF) leg leveling foot, with an innovative design that allows simple manual leveling by turning the foot under the weight of the appliance
- Richco Introduces WIT-40LAR Releasable Cable Ties - Richco Introduces WIT-40LAR releasable cable ties that eliminate multiple parts by incorporating a cable tie and holder into one part
- Richco Introduces the FTH-34 & 35 Screw Mount Cable Tie Holder - Richco introduces the FTH-34 & 35 screw mount cable tie holder with a low profile for use where space is limited and 4-way cable tie entry making part orientation fast and easy
- Richco Introduces VGS Metal Screws for VG Series Grommets - Richco Introduces VGS metal screws for VG series grommets designed to mount the VG series Vibration Grommets in application to control noise and vibration
- Richco Introduces PSB Push Spacer on Adhesive Base - Richco Introduces PSB push spacer on adhesive base with sturdy construction that supports heavily loaded PCB's
- Richco Introduces SEI - Sheet Metal Edge Fasteners. Richco introduces SEI - sheet metal edge fasteners that provide strong threads in metal sheets too thin to be tapped. Please see pdf for the features and benefits of this new product.
- Richco Introduces FTH-33-01 - Pressure Hold Cable Tie Holder. Richco introduces FTH-33-01, a pressure hold cable tie holder that allows pre-assembly of the cable tie into the holder and holds it in place. Please see the pdf for the features and benefits of this new product.
- Richco Introduces SHR-C - Harness Wrap Clip. Richco introduces SHR-C, a harness wrap adjustable clip to hold both SHR-20 and SHR-25 slit harness wrap sizes. Please see the pdf for the features and benefits of this new product.
- Richco Introduces WITBH - Blind Hole Mounted Cable Ties. Richco introduces WITBH - blind hole mounted cable ties with barbed mounting head that grips to the inside of a hole. Please see the pdf for the features and benefits of this new product.
- Richco introduces the QM - Vibration Mounts
- Richco introduces the FSR - Foot, Snap Rivet Mounted
- Richco 's FQT-1�Panel Fastener, Quarter Turn - Richco introduces the FQT-1�Panel Fastener, Quarter Turn. Please see the pdf for the features and benefits of this new product.
- Richco SRSG�Self-Retaining Screw Grommet Line Extension - Richco introduces the SRSG�Self-Retaining Screw Grommet Line Extension. Please see the pdf for the features and benefits of this new product.
- WIT-50RLA-X-Arrowhead Mount Cable Ties - Richco announces their new Arrowhead Mount Cable Ties, which includes the following Features and Benefits: Snaps into a pre-drilled hole for quick mounting; bundling of cables can be done before or after mounting; arrowhead mount rotates in the hole to self-align the wire bundle; one-piece mount and harness saves time and cost; available in 4 different lengths; 50 lb tensile strength.
- Richco FTH-30-Cable Tie Holder - Richco announces their new FTH-30-Cable Tie Holder which included the following features and benefits: Has the same mounting head as a cable tie; allows bundle with pre-assembled cable tie to be held in place; when tail end of the cable tie is inserted, the tie holder locks it into place; can be used as a standard tie holder, using ties that are not pre-assembled; holds all Richco WIT-18 series cable ties; holder is easily installed in panel; simply snap in place.
- FCCB - Arrowhead Mount Cable Clamp - Richco announces their new FCCB - Arrowhead Mount Cable Clamp which includes the following features and benefits: Part easily mounts into pre-driven holes and is easily removed; tension wings provide extra pressure to the board to ensure a snug fit; two sizes accommodate different cable thicknesses; can be used for flat, ribbon or round cables; molded of a durable, UL94 V2 rated Nylon 6/6.
- FMB - Fan Mount Breakaway Style - Richco announces their new FMB - Fan Mount Breakaway Style, featuring Elastomeric, evenly spaced ribs for mounting fans of many different heights; pull-through, breakaway installation tabs ease assembly, especially in blind corners; pull-tab breaks away cleanly after installation for low profile panels, fits Industry standard DC Fans with a wide range of hole sizes and panel thickness; noise and vibration reduction; reduces the number of hardware for the assembly.
- Introducing the Richco FMG - Fan Mount with Gasket
- Introducing the Richco Flat Cable Clamp - Arrowhead Mount
- Introducing the Richco Threaded Rubber Bumper
- Introducing the Richco RDAFCC Flat Cable Clamp
- Richco introduces the WWSB - Wire Saddle On Adhesive Base
- Richco anncounces their new Liquid Tight Plug (LTP)
- The Latest Richco New Product Bulletins
- Grounding Circuit Board Supports - Richco introduces a new circuit board support from the leader in circuit board hardware. (.pdf)
- Clinch Rivet - Richco introduces a new line of rivets for fastening two or more panels together. (.pdf)
- Rotary Dampers - RFRT Series - Richco introduces a whole new line of rotary dampers. (.pdf)
- Releasable Arrowhead Harness Tie - Richco has added the WIT-30XAR series to their extensive line of cable ties. (.pdf)
- Richco Inc. announces a new line of snap in horizontal card guides. Please click for complete press release and photo. (.pdf)
- Richco introduces the Optical Fiber Segment - 90 degrees (OFS90-30R) for fiber cable routing around a 90 degree angle. Please click for complete press release and photo. (.pdf)
- Richco Inc. introduces a new addition to their line of 2mm fiber cable holders. Click for complete press release and photo. (.pdf)
- Richco has added a new KKG-3.6A1-RT to their extensive line of Kwik Klips. These clips are ideal for routing cables along corners. (.pdf)
- Richco is now able to offer 5 of their most successful fasteners with an easily removable low protrusion quarter turn base. (.pdf)
- Richco introduces the Optical Fiber Splice Tray System which provides a protective environment where excess fiber can be stored and splices may occur without worry of damage to the fiber. (.pdf)
- Richco introduces a new fiber cable routing device. Click for more about the new Optical Fiber Holding Base. (.pdf)
- Blind Hole Circuit Board supports BHC1/BHL1/BHDL1 Series. (.pdf)
- The Locking Wire Saddle-Snap Rivet (LWS-SR) is an addition to Richco's extensive line of wire saddle products. (.pdf)
- Richco introduces the new Fiber Optic Engineering Design Kit filled with all that Richco has to offer the fiber optics industry. (.pdf)
- Optical Fiber Connector Adapter (OFCA) (.pdf)
- Extruded Wire Harness Clip (EXWHC) (.pdf)
- Kwik Wrap Adhesive Flat Wiring (RKWFA) (.pdf)
|
|
eStore
